Professional Mold Removal & Remediation Company in West Palm Beach

Mold loves West Palm Beach’s humidity. Don’t give it time to spread—call our licensed, insured specialists for fast mold removal and full-service remediation. We’ll make your home clean, dry, and safe again.

A technician scrubbing the mold affected surface

Our Mold Removal & Remediation Process

Mold cleanup isn’t just about spraying something on the wall. If the moisture source is still there, the problem comes right back. That’s why we follow a step-by-step remediation process aligned with IICRC S500, IICRC S520, and NORMI guidelines — so when it’s gone, it stays gone.

1

Inspection & Testing

We don’t guess. Moisture meters and thermal cameras tell us where water is hiding — inside drywall, under floors, or behind cabinets. In some cases, we’ll bring in mold testing for air samples or swabs. Insurance adjusters usually want that paper trail, especially if black mold is suspected.

2

Containment & Negative Air

Once we know the hot spots, we seal the area tight. Plastic barriers, zipper doors, and negative air machines keep spores from drifting into the rest of the house. It matters most in downtown condos and Riverwalk townhomes, where a shared A/C system can spread contamination between units.

3

Source Removal (Remediation)

This is the dirty work. Moldy drywall gets cut out. Insulation? Bagged and tossed. Surfaces get scrubbed with HEPA vacuums and wire brushes, then treated with antimicrobials. In El Cid and Flamingo Park, we often deal with old plaster walls — delicate but notorious for hiding years of dampness. We take extra care not to destroy historic finishes while still getting rid of the contamination.

4

Drying & Dehumidification

No drying, no victory. We run commercial dehumidifiers, air movers, and heaters until the numbers say it’s safe — usually under 55% humidity and ≤15% material moisture. Homes in South End (SoSo) and Northwood Hills often need crawlspace drying too, since those areas trap humidity like a sponge.

5

Post-Remediation Verification

We don’t just pack up and leave. We confirm the mold is gone and the structure is dry. If your HOA, buyer, or insurance adjuster needs proof, we bring in a third-party assessor for clearance testing. 

An infographic displaying mold removal costs in West Palm Beach

How Much Does It Cost To Remove Mold In West Palm Beach?

In West Palm Beach, the cost of professional mold removal and remediation ranges from $10 to $30 per square foot. Most small jobs, such as cleaning up a bathroom wall or closet, fall around $800 to $1,500. Larger projects — like attics, crawlspaces, or whole-home remediation after a leak — can reach $5,000 to $25,000 or more, depending on how extensive the damage is and how difficult the area is to access.

Mold inspections and testing aren’t included in those prices — they’re typically billed separately, ranging from $250 to $500, with an additional $100–$200 per lab sample if air or surface testing is required.


The table below presents the estimated costs derived from the data of the jobs executed during 2024–2025.

ScenarioTypical AreaEstimated Cost RangeNotes
Small Bathroom Wall (minor leak)20–40 sq ft$250 – $1,000Common in Flamingo Park homes with plumbing leaks behind tile.
Bedroom Wall / Ceiling (roof leak)60–100 sq ft$800 – $2,500Includes drywall removal and HEPA cleaning.
Attic / Crawl Space100–200 sq ft$1,500 – $5,000Often from A/C condensate or poor ventilation — seen in SoSo and El Cid.
HVAC Duct Cleaning Only$500 – $1,500Duct cleaning and sanitization; more if multiple zones.
Complete HVAC System$3,000 – $10,000Full HVAC contamination remediation
Whole-Home Remediation500–1,000 sq ft$10,000 – $25,000+After major leaks or flooding events.

Near You, Across West Palm Beach

Need help today? Our licensed team covers all of West Palm Beach. We know the buildings, the weather, and the usual leak spots—so we can find the source fast and keep costs down.

Neighborhood coverage

Zip codes we serve

Before & After: Attic Mold Removal in Grandview Heights

Some stories are better shown than told.

This project came from an old home in Grandview Heights, one of West Palm Beach’s historic neighborhoods. The homeowner called after noticing a musty smell and dark stains creeping across attic rafters. Turns out, a small roof leak had been dripping for months — the perfect setup for mold growth.

Before:

The attic had visible black  mold along the underside of roof sheathing. Humidity levels were over 70%, and insulation was damp to the touch. This kind of slow leak often hides until the smell gives it away.

An attic in Grand View Heights infested with black mold
Attic infested with balck mold before mitigation

After:

Our team contained the area, removed contaminated insulation, and cleaned every surface with HEPA vacuums and antimicrobial treatment. After running commercial dehumidifiers for 48 hours, moisture levels dropped below 15%. The wood dried out clean, no staining left behind — and the homeowner got a written clearance report for peace of mind.

The attic after mold treatment

About Us

At WPB Mold Removal, we’re your locally owned, licensed and insured mold remediation team based right here in West Palm Beach. With over a decade of experience servicing Flamingo Park, El Cid, Southland Park and the wider Palm Beach area, we use advanced moisture meters, HEPA containment and lab-backed clearance testing to get it done once—and done right.
Learn more about our story and credentials.

Team working on a project

Why West Palm Beach Homeowners Choose WPB Mold Removal

Because you deserve a team that’s proven, local, and honest.

Locally Rooted, Always Nearby

Based in West Palm Beach — Serving West Palm Beach neighborhoods like Flamingo Park, El Cid, and Grandview Heights for over a decade.

Fast 24/7 Response

Same-day dispatch for leaks, floods, and urgent mold cleanup.

Licensed & Insured in Florida

Certified Mold Remediator (MRSR) and fully insured for residential and commercial work.

Proof-Based Work

Moisture readings, before/after photos, and clearance testing with every project.

Transparent Pricing

Get a clear quote before we start. Always.

Certifications

FAQs

How much does it cost to remove mold?

Mold remediation in West Palm Beach costs between $10 and $30 per square foot depending on factors like how hard the mold is to reach, the extent of damage, and labor involved.

Mold inspection and testing are billed separately, averaging $250 to $500 before cleanup starts.

An infographic displaying mold removal costs in West Palm Beach

Yes — professional mold removal is absolutely worth it if the area is larger than 10 square feet or involves HVAC, drywall, or insulation.
DIY methods like bleach only clean the surface. Licensed remediators use HEPA filtration, containment barriers, and moisture control to stop mold from coming back — saving you from bigger repairs later.

You can’t stop mold spores from existing, but you can keep them from growing.
Permanent mold control means fixing the moisture source — leaks, humidity, or poor ventilation.
A professional remediation service removes the affected materials, dries the structure below 15% moisture, and applies antimicrobial treatment to prevent regrowth.

It depends on the size and location of the job.
For small areas, you can usually stay home after containment is properly set up.
For larger or toxic mold projects, temporary relocation is safer, especially for kids, seniors, or anyone with allergies or asthma.
Final advice can be given to you after inspection.

Most residential mold remediation jobs in West Palm Beach take 1 to 5 days.
Small areas can be done in a day, while larger attic or crawlspace projects may take a full week, including drying time and clearance testing.
Moisture levels must drop below safe limits before rebuilding starts.